Anaesthesia Monitor BIO-3A
Pulse oximeter with ECG unit BIOSCOPE-D.
| BIO-3A |
| BIOSCOPE-C |
| BIOTREND |
| RECOMED |
| URO-2050 |
| No longer |
| deliverable: |
| BIO-3 |
| VITASCOPE-A |
The anaesthesia monitor BIO-3A is suitable both for mains and battery operation. It also has built-in rechargeable batteries besides an external power supply. The operation time with fully loaded batteries is about eight hours. The batteries will be loaded with the monitors built-in charger. On the one hand the BIO-3A could be used in an uninterrupted mains operation mode at a permanent location, on the other hand a mobile use is also possible.
The monitor BIO-3 is not developed for bed-sided use. It is suitable for operations while medical specialist staff is in the proximity and can directly react to a triggered alarm.
 Click on the picture to enlarge it. |
Application range:
|
Standard accessories:
|
Optional accessories:
|
Technical data: |
|
| ECG by BIOSCOPE-D | |
| one-channel recording | |
| heart-rate - measurement range |
30 ... 240 bpm |
| heart-rate - measurement accuracy |
30 ... 150 bpm: ±1 bpm 151 ... 240 bpm: ±2 bpm |
| sensitivity | 0.25 ... 8 mV (automatic level control in 4 steps) |
| bandwidth | 0.5 ... 40 Hz (3dB) |
| time constant | 0.33 sec |
| input impedance | 2 MOhm |
| suppression of mains hum | |
| marking of pacemaker pulses | |
| average heart rate | displayed by the LED display in case ECG is not connected the averaged pulse rate will be displayed (derived by finger sensor) |
| alarm limits | adjustable over the whole measurement range |
| SpO2 by Pulse-Oximeter | |
| oxygen saturation - measurement range |
45 ... 99 % |
| oxygen saturation - accuracy |
70 ... 99 %: < 2 % < 70 %: not specified |
| pulse rate - measurement range |
30 ... 240 bpm |
| alarm limits | adjustable over the whole measurement range (lower limit value only) |
| bar graph display | for assessment of quality of pulse signal |
| sensor | universal hinged finger sensor for adults (other sensors on request) |
| General | |
| power supply | battery and mains operation |
| mains voltage | 230V ±10%, 50 Hz |
| running time in battery mode | 6 ... 8 h permanent operation |
| electrical safety | The monitor BIO-3 agrees with: |
| dimension | approx. 160 x 180 x 120 mm (w x d x h) |
| weight | approx. 1.3 kg (incl. BIOSCOPE-D, without accessories) |
| Currently not available ! The service for BIO-3A is continued. Modifications reserved. |
|
| Optional PC software for BIO-3A | |
 Click on the picture to enlarge it. |
The optional available PC software BIO-3A is the perfect tool to document the data derived from the anaesthesia monitor BIO-3A. So you can see the signals of ECG and plethysmogramm on a larger screen of a PC and watch the trend of heart rate and SpO2 in real time. Certainly it is possible to store the transmitted data for a later processing. The software has a built-in printing function for your documentation. Also is a data export possible. |
| Minimum requirements for the used PC: | |
| Operating sytem: | Windows 2000 or Windows XP |
| Memory: | 64 MByte RAM |
| Available space on hard disk: | 10 MByte plus size for storing measured values |
| Drive: | CD drive |
| Screen resolution: | at least 1024 x 768 pixel |
| Interface: | serial interface (RS232) |
Please send an email to sales@recomedical.com to ask for pricing.
Note:
Operating instructions and software updates you can find on our download page.
Last update:
10.05.2010